What Is The Primary Factor Affecting The Machinability Of Materials? First of all, the chemical composition of steel is very important. The higher the alloy composition of steel, the harder it is to process. As the carbon content increases, the metal cutting performance decreases. Second, the structure of the steel is also very important for…
DetailsMain Test Procedure For Injection Molding Machine In order to avoid unnecessary waste of time and trouble during mass production, it is necessary to patience to adjust and control various processing conditions, find the best temperature and pressure conditions, and develop standard test procedures, and can be used to establish daily work methods. 1. Check…
DetailsWhat Data Is Required To Be Recorded During The Injection Molding Machine? Record and analyze the data as a need to modify the mold and production conditions, and as a reference for future mass production. 1. Make the processing run time longer to stabilize the melt temperature and hydraulic oil temperature. 2. According to…
DetailsWhat Should I Do If There Are Dents In Plastic Products? 1. The cause of the dent (1) The thickness of each part of the product is different. (2) The internal pressure of the mold is insufficient. (3) The mold cooling is insufficient. (4) Deformation due to insufficient cooling time. 2. The solution (1)…
DetailsHow Is The Dent On The Plastic Product Formed? In the process of producing products, the dent is the most frequent occurrence of the bad phenomenon, and the plastic injected into the mold undergoes volume shrinkage upon cooling, and the early cooling portion, that is, the surface is first hardened, and bubbles are generated inside.…
DetailsMold Manufacturing Accelerates Transformation Under The Impetus Of Technology In the traditional mold manufacturing process, molds made by mold manufacturers have their own unique features in terms of durability, strength and precision. Usually, the mold manufacturer will first use the software such as PRO-E to draw the mold drawing, and then use the corresponding machine…
Details3D Printing Gear Molds To Achieve Breakthroughs In The Entire Industry At present, under the influence of 3D printing technology, many changes have taken place in the traditional mold manufacturing industry. Among them, the gear mold manufacturing industry is driving a new round of industrial revolution at an unprecedented speed under the promotion of 3D…
DetailsHow ABS Injection Products Should Increase The Brightness? 1.Injection mold (1) If the mold cavity is poorly processed, if there are defects such as scratches, micropores, abrasion, roughness, etc., it will inevitably be reflected on the plastic parts, so that the gloss of the plastic parts is poor. In this case, the mold must be…
DetailsWhat Limits The Development Of 3D Printing? Despite the powerful implementation of 3D printing, this does not mean that it can replace some of the manufacturing technologies that are now widely used. For example, in the manufacture of industrial parts molds, although high-strength engineering plastics are used as printing materials, molds manufactured by 3D printing…
DetailsMold Material Selection Mold selection is a very important part of the entire mold making process. The mold selection needs to meet three principles. The mold meets the work requirements of wear resistance, toughness, etc. The mold meets the process requirements, and the mold should meet the economic applicability. Condition requirements: 1.Wear resistance When the…
Details