Analysis of injection molds for auto parts In the development of the automobile industry, the demand for plastic parts is increasing day by day, because the construction of automobiles has a very high application degree of plastic parts. That is to say, the quality of plastic parts has a huge promotion effect on the development…
DetailsMold Trial of Metal Stamping Die What is the process of a stamping tool trial? A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. It’s one of the most important aspects of metal stamping. During tool trial, it could test…
Details
How to produce silicone gasket with Wacker silicone rubber? In recent years, with the development of science and technology and the continuous improvement of people’s living standards, more and more customers have pointed out a large number of standards for selected products, such as common electronic equipment, household appliances, and cars in everyday life. The…
Details
What’s Design for Manufacturing (DFM) in Injection Molding? Design for manufacturing (DFM) in injection molding means the product design needs to meet the requirements of product manufacturing and has good manufacturability, so that the product can be manufactured with the lowest cost, the shortest time, and the highest quality. Its key is the processability analysis…
Details
What’s the best hardness range of silicone O-ring? People who are often in contact with silicone products will find that some silicone products are softer to the touch, and some are harder. The use environment has different requirements for the hardness of rubber and plastic products. For example, in order to achieve the real feeling…
Details
How to Make A Silicone Gasket with Silicone Rubber Compressio Molding? Commonly used processes for producing silicone rubber products include compression molding and injection molding, among which compression molding is used for a wider range of products. This video shows silicone compression molding process. To sum up, choosing different gates depends on different product and…
Details
Different Types of Gates for Injection Molding Gate design plays an important role in plastic injection mold design. The location, size, and shape of a gate has a significant effect on a finished product whether from product structure or appearance.Fit Precision Mold Co.,Ltd summarize some types of gates, which is commonly used in injection molding. Pin-point Gate: It is a gate…
DetailsTapping Process: How to Achieve Perfect Tapped Hole? Tapping holes isn’t a process that can be easily completed. Before tapping holes on bronze casted parts, a technician should collect all pertinent measurements beforehand. Otherwise, a poorly tapped hole may lead to the wrong thread finish or size, which can then lead to a failure of…
DetailsPlating PC / ABS Process Flow To form good adhesion between the metal coating and the plastic base material, the most important step is to soak in an etching solution, which is usually a mixture of chromic acid and sulfuric acid. The electroplating process of electroplating PC/ABS is as follows: (1) Inspection of plastic parts,…
DetailsCommon Ways To Improve Plating What? Dec 26, 2018 1. Component design and plating process If stress is applied, there is a certain stress in the plastic part, which will bring a lot of problems to the roughening of the plastic parts and the subsequent series of pretreatment processes. Therefore, plastic parts with higher stresses…
Details