insights

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] There are several kinds of bubbles, the phenomenon is different, and the reasons are different. The description is as follows. 1. Thicker products,

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] 1. Reasonable use of cooling lubricating fluid, play the three main functions of cooling, washing and lubrication, keep cooling and lubrication clean, and

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] In the manufacture of rigid plastic parts, the surface near the gate forms a dense corrugation centered on the gate, sometimes referred to

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The molten plastic in the cavity meets in the form of multiple strands due to the intrusion of the insert holes, the discontinuous

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] Mold material is the most important factor in determining the manufacturing method. Aluminum is difficult to cast and only certain aluminum alloys can

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The main reasons and solutions for the uneven color of injection molded products are as follows: (1) The colorant is poorly diffused, and

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The heat treatment is to change the metallographic structure of the die-casting mold material by heating and cooling, and to obtain the necessary

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] From the mold material, heat treatment, design, manufacturing and processing, from the die-casting process, production operations, mold maintenance and other aspects, to analyze

[vc_row][vc_column][vc_custom_heading source=”post_title”][vc_column_text] The new process of die forging heat deformation heat treatment is gradually becoming familiar. Most of the die forging temperature is about 850