Push-Pull Injection Molding Such as injection molding process, this molding method can eliminate defects such as melt seams, voids, cracks and microscopic porosity in plastic parts, and can control the arrangement of reinforcing fibers. It adopts two main injection units and one double injection unit. Mold. In operation, the main injection unit pushes the melt…
Layer Injection Molding Layered injection molding is a molding process that combines the characteristics of co-extrusion molding and injection molding, which can arbitrarily produce a very thin layered state in complex parts. Layered injection molding simultaneously performs two different resin injections, which are layered in a co-extrusion die through a multi-stage co-extrusion die, and the…
Microcellular Foam Injection Molding In the conventional structural foam injection molding, a chemical foaming agent is usually used, and since the foaming pressure generated is low, the produced article is limited in wall thickness and shape. Microcellular foam injection molding is limited by the use of supercritical inert gases. Microcellular foam injection molding uses supercritical…
Multi-Component Injection Molding Multi-component injection molding offers new possibilities for plastics processing, combining different materials or colors in a single molding. Production can be done in one process without the need for additional assembly or post-machine processing steps. Multi-component injection molding is a fully automated process with a high degree of flexibility, making it ideal…