Six Major Reasons For Screw Breakage In Injection Molding Machines The six common reasons for screw breakage in injection molding machines are as follows: (1) The quality of the screw of the injection molding machine itself is poor. (2) The screw length to diameter ratio is too large. (3) There is a problem with the…
How To Judge The Quality Of The Extrusion Die The use of extrusion dies is also very common. If you do not notice the quality of the extrusion when you use it, it will seriously affect the normal use of the extrusion dies. In order to make the molds use well, the following judgments are…
Method For Solving The Problem Of Tensile Mold Strain Solving the problem of strain in the mold and workpiece forming process should be based on the basic principle of reducing adhesive wear, and changing the nature of the contact pair as a starting point. Hereinafter, the three sides of the pair of contact pairs are…
Benefits Of Multi-Layer Hot Runner Mold ompared to conventional single-sided injection molds, the use of stacked hot runner molds allows the plastic melt to be evenly distributed into two separate parting surfaces, thereby more than doubling the throughput of the injection molding machine. Double the production of parts The stacked hot runner mold technology does…