Die Casting Alloy And Die Steel Affinity The greater the affinity of the die-cast alloy and the die steel, the easier it is to fuse and bond together. After the die-casting alloy is adhered to the wall, a large release resistance will be generated, and the casting will be pulled when it is released. Visual…
Solution To Deformation Problem Of Planar Injection Parts It is indeed a difficult problem to completely solve the problem of deformation of large-area injection molded parts. In production, we have summarized some of the more effective measures to improve the problem of deformation: 1. The mold is changed into multi-point water (usually three-plate molds), and…
Solution Techniques To Deformation Problem Of Planar Injection Parts If you do not achieve the desired results, you can only take the form of a model. Because most people do not use well, they need some skill. First of all, to advance the injection molded parts, and then take it is still in a state…
Preheating Of The Mold In addition to heat and lubrication of the billet prior to warm extrusion, the extrusion punch and die must be preheated. Generally preheated to 150 ~ 300 °C and then extrusion production. Mold preheating is mainly to ensure: 1. When the extrusion blank is placed into the mold, the temperature of…