Plastic Blow Mould The plastic blow mold is a mold for molding hollow containers of plastic containers (such as beverage bottles, daily chemical products, and the like). The form of blow molding mainly consists of extrusion blow molding hollow molding, injection blow molding hollow molding, injection stretch blow molding hollow molding (commonly known as “injection…
DetailsPlastic Extrusion Mould A type of mold used to form a continuous shape of plastic products, also known as an extrusion molding head, is widely used in the processing of pipes, rods, monofilaments, sheets, films, wire and cable coatings, profiles, and the like. The corresponding production equipment is a plastic extruder, the principle of which…
DetailsBlister Plastic Mold The plastic blister mold is a mold for forming some simple plastic products by using plastic plates and sheets as raw materials. The principle is that the plastic plate and the sheet fixed on the die or the punch are deformed by heating and softening and attached to the cavity of the…
DetailsTwo-Color Injection Mold Features The moving mold of the mold is the same. The injection molding process is rotating and needs to be exchanged, so the moving mold must be exactly the same. If there are special cases, the cavity can be different when molding. After the injection molding of the first shot of the…
DetailsPlastic Compression Mould Plastic compression molding molds include two types of structural molds, compression molding and injection molding. They are a type of mold that is mainly used to form thermoset plastics, and the corresponding equipment is a pressure forming machine. The compression molding method heats the mold to the molding temperature (generally 103°-108°) according…
DetailsTechnical Characteristics Of Multi-Color Injection Molding 1.Vertical turntable The vertical turntable (parallel shot) injection molding machine is the most widely used two-shot injection molding machine, capable of forming a large number of small and medium-sized products. Usually the tonnage is below 1500 tons, which has certain requirements on the size and shape of the mold,…
DetailsTwo-Color Injection Molding Combined With LSR Application Multi-color injection molding technology has been developed for many years, and its molding branch has become more and more perfect. It can be applied to various fields well, and its production efficiency is extremely high. It can be satisfactorily met by different practical requirements, so it is widely…
DetailsProcess Evaluation For Multicolor Injection Molding Two-color injection molding is a very mature molding process. In the initial stage of mold development, analog analysis can be performed by various CAE software. The analog operation of the model can accurately determine the mold and various parameters of the molding. 1.Material analysis The analysis of materials is…
DetailsCurrent Status Of Other Rapid Prototyping Technologies Precision Optical Manufacturing (POM) of Michigan, USA, is developing Direct Metal Deposition (DMD) technology, which can produce metal parts with uniform texture and high strength by laser melting metal powder. The precision RP equipment developed by the National Aeronautics and Space Administration (NASA) can be used to process…
DetailsDouble Material Injection Mold Design The general two-material product can be manufactured by a single-color injection molding machine. Basically, one injection molding machine can be used. However, the post-processing process is quite time-consuming and complicated, directly affecting the quality of the product, and the total production cost is not economical. In addition to the corresponding…
Details